um welches Problem handelt es sich ?

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

um welches Problem handelt es sich ?

Michael Gehm
Habe meine aktuelle Digitalkamera schon mehrfach unter Linux als Mass-Storage
angesprochen. Nachdem ich meine Linux Box mal wieder gekillt habe, habe ich
meine alte Gentoo-Sicherung eingespielt. Hier will es nicht klappen mit der
Ansprache. Ein lsusb -v bringt folgende Fehlermeldung zu Tage:


Bus 001 Device 007: ID 0839:001e Samsung Techwin Co., Ltd
cannot get string descriptor 1, error = Invalid or incomplete multibyte or
wide                       character(84)
cannot get string descriptor 2, error = Invalid or incomplete multibyte or
wide                       character(84)
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 Interface
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0839 Samsung Techwin Co., Ltd
  idProduct          0x001e
  bcdDevice            0.00
  iManufacturer           1
  iProduct                2
  iSerial                 0
  bNumConfigurations      1
cannot get config descriptor 0, Invalid or incomplete multibyte or wide
characte                      r (84)
  Language IDs: none (cannot get min. string descriptor; got len=-1,
error=84:In                      valid or incomplete multibyte or wide
character)

Kann da jemand etwas mit anfangen ?

Thx

Michael

--
If Linux doesn't have the solution you have the wrong problem.
Registered Linux user #191 807      ICQ # 125941330
http://www.michael-gehm.de         http://www.geocaching.de
Homo sapiens non urinat in ventum !
_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: um welches Problem handelt es sich ?

Oliver Dörr
Hi Michael,

this is an english mailing list and so i'll translate your mail for you...

Michael wrote:
<cite>
I have used my actual digital camera multiple times as a Mass-Storage
device. After crashing my linux, I've re-installed an old Gentoo-backup.
No it does not work anymore. lsusb -v shows the following error messages:

Bus 001 Device 007: ID 0839:001e Samsung Techwin Co., Ltd
cannot get string descriptor 1, error = Invalid or incomplete multibyte or
wide                       character(84)
cannot get string descriptor 2, error = Invalid or incomplete multibyte or
wide                       character(84)
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 Interface
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0839 Samsung Techwin Co., Ltd
  idProduct          0x001e
  bcdDevice            0.00
  iManufacturer           1
  iProduct                2
  iSerial                 0
  bNumConfigurations      1
cannot get config descriptor 0, Invalid or incomplete multibyte or wide
characte                      r (84)
  Language IDs: none (cannot get min. string descriptor; got len=-1,
error=84:In                      valid or incomplete multibyte or wide
character)

Could anybody interprete this messages?

</cite>
Thats basically what Michael wrotes
Oliver

Michael Gehm wrote:

>Habe meine aktuelle Digitalkamera schon mehrfach unter Linux als Mass-Storage
>angesprochen. Nachdem ich meine Linux Box mal wieder gekillt habe, habe ich
>meine alte Gentoo-Sicherung eingespielt. Hier will es nicht klappen mit der
>Ansprache. Ein lsusb -v bringt folgende Fehlermeldung zu Tage:
>
>
>Bus 001 Device 007: ID 0839:001e Samsung Techwin Co., Ltd
>cannot get string descriptor 1, error = Invalid or incomplete multibyte or
>wide                       character(84)
>cannot get string descriptor 2, error = Invalid or incomplete multibyte or
>wide                       character(84)
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.10
>  bDeviceClass            0 Interface
>  bDeviceSubClass         0
>  bDeviceProtocol         0
>  bMaxPacketSize0        64
>  idVendor           0x0839 Samsung Techwin Co., Ltd
>  idProduct          0x001e
>  bcdDevice            0.00
>  iManufacturer           1
>  iProduct                2
>  iSerial                 0
>  bNumConfigurations      1
>cannot get config descriptor 0, Invalid or incomplete multibyte or wide
>characte                      r (84)
>  Language IDs: none (cannot get min. string descriptor; got len=-1,
>error=84:In                      valid or incomplete multibyte or wide
>character)
>
>Kann da jemand etwas mit anfangen ?
>
>Thx
>
>Michael
>
>  
>
_______________________________________________
Digikam-users mailing list
[hidden email]
https://mail.kde.org/mailman/listinfo/digikam-users
Loading...